en
en es
Phone +34 985 73 39 52

AIR QUALITY ANALYZERS

Met One Instruments

Met One Instruments is a leader company in research, development and manufacturing of meteorological instruments, particle monitoring and environmental software.

CONTINUOUS PARTICLE ANALYZERS

BAM 1020

The model BAM 1020 automatically measures and registers the concentration of particles by measuring the attenuation of beta radiation. It is the first equipment with these characteristics that has been certified by the United States Environmental Protection Agency (EPA). It has a European certificate for equivalent measurement method.

E-BAM

It is a real time beta attenuation particle monitor, similar to the EPA methods for class III in the US. It provides accurate measurements of PM10 or PM2.5 in real time. The system can be placed permanently on roofs, near roads, at industrial sites, or it can be set up quickly in case of emergency. Designed for work in hostile environments without additional protection.

E-SAMPLER

E-SAMPLER is a dual technology instrument combining real-time measuring by means of a laser dispersion technique and a gravimetric filter method. Its filters can be extracted and replaced in less than a minute. The filter medium can be selected depending on the kind of analysis that will be chosen later. The ambient temperature and the barometric pressure are measured to provide a flow in current conditions.

BLACK CARBON ANALYZERS

BC 1054

The model BC 1054 is a multispectral analyzer that measures light transmittance through a filter medium where particles are deposited in real time, thus calculating the concentration of black carbon with 2 different wavelengths, from almost UV to IR. It can be connected to a wide variety of products through the BAM 1020 or through several meteorological sensors.

BC 1050

The model BC 1050 is analyzer that measures continuously light transmittance through a filter medium where particles are deposited in real time, thus calculating the concentration of black carbon with 2 different wavelengths, from almost UV (375 nm) for organic and elemental carbon to IR (880 nm) for elemental carbon.

PARTICLE METERS IN CONTROLLED ENVIRONMENTS

GT-321

GT-321 is a particle handheld meter that counts particles up to 0.3 microns. It is completely autonomous, with an internal battery and sampling pump. It can be programmed and there are five possible sizes for the particle in question: 0.3, 0.5, 1.0, 2.0 or 5.0 microns.

GT-521S

GT-521S allows users to select the size of the particles, with two programmable counting channels, each one from 0.3 to 10 microns. It shows differential or cumulative particle counts in real time. Its remote operation through RS-232 or RS-485 ports ensures an extensive control, including all the operations with central display. Optionally, measuring temperature and relative humidity can be available.

GT-526S

GT-526S allows users to select among 6 sizes of particles, with six programmable counting channels, each one from 0.3 to 10 microns. It can store up to 8 000 registers. These registers can be seen, print with an optional printer and downloaded through COMET or ASCII commands. Two limits for programmable counting warning.

Do you want to request your Quotation?

Send your request