IOT DEVICES
Our URVAMM system is a mobile air quality monitor, designed to be installed in public service vehicles, such as city buses, garbage trucks, personal vehicles and to monitor urban pollutants across the city.
Nanoenvi ® UrVAMM makes it easy to identify the pollution hot spots in cities, so that traffic strategies can be designed and validated to reduce the impact that vehicle emissions have on urban air quality. Nanoenvi® UrVAMM can be connected to efficient driving systems to create a global solution. The system is fully aligned with the new paradigm opened by the smartcity concept complying with secure, private, open and friendly data available for citizens and stakeholders. All our sensors are calibrated at our state-of-the- art calibration laboratory to ensure the accuracy and reliability of the measurements.
Installation
The Nanoenvi® UrVAMM equipment is installed inside a highly-resistant aluminum casing. Its design makes installation easy in any kind of buses, trucks and official vehicles. URVAMM uses the air-conditioning system in the vehicle to collect samples for analysis and is directly fed by the power outlets available.
Sensorics
The Nanoenvi® UrVAMM equipment uses electronics for gas monitoring based on electrochemical technology, capable of obtaining electrical energy from chemical reactions. This device can measure pollutant gases present in cities such as CO, CO2, NO, NO2 and SO2, generated by road traffic and automobile exhaust gases.
Communications
URVAMM can be integrated in the IoT networks of the city (Smart City) by means of the usual IoT protocols (3G, LoRa®, 6lowpan, etc.). All URVAMM networks for environmental monitoring are delivered completely integrated (Plug n’ Play) with the Smart City IoT platform chosen by the client.
Case Study
Nanoenvi® UrVAMM is a portable system for the monitoring and real time of the most important atmospheric pollutants in the urban environment. So far, measurements have been taken in cities such as Madrid, Valencia, Tarragona, Gijón and Oslo, where the air quality sensorization platform on board in service fleets has been successful.
PROCESSOR
AM335xARM Cortex A8
FREQUENCY
1 GHz
SRAM
512 MB
EPROM
4 KB
FLASH
4 GB
EXTERNAL STORAGE
32 GB
CLOCK
400 MHz
CONSUMPTION
460 mA @ 5V
ENCLOSURE MATERIAL
Anodized aluminum
SEALING
Silicone rubber Elastosil®
COVER SCREWS
Stainless Steel
TYPE OF PROTECTION
IP66 EN 60529
RESISTANCE TO IMPACT
According to ISO 2039-1
ENVIRONMENT TEMPERATURE (MIN.)
5 ºC
ENVIRONMENT TEMPERATURE (MAX.)
40 ºC
APPROXIMATE WEIGHT
800g
DIMENSIONS
100x100x160 mm
MAXIMUM NUMBER OF SENSORS
4
OS
Linux os
GPS
Yes
3G Mobile communications
LoRa® communications module
Sensors (CO, CO2, NO, NO2 and SO2)
Indoor air quality sensors
Nanoenvi URVAMM
Mobile Air Quality Measurement
NO2, CO and CO2 sensors
Communications via 3G or wifi.
Integration with IoT platforms.
Do you want to become a distributor?