IOT DEVICES
Nanoenvi® WATER is the latest addition to the Nanoenvi range of solutions, designed for real-time monitoring of several physical and chemical parameters in fresh water.
Nanoenvi® WATER has several sensors to optimize the processes of fertirrigation and real-time monitoring of the chemical and physical parameters of irrigation water. Thanks to our technology with connection to the cloud, you can have real-time access to the updated values of the parameters monitored and establish warning limits to activate minimization procedures.
Equipment
The Nanoenvi WATER equipment is made of highly-resistant plastic polymer material (IP66), which ensures its performance under the strictest conditions required for a product that has to take samples in the water. All the samples and connections are protected against leaks.
Electronics
The onboard electronics in the Nanoenvi WATER device allows the connection of all kinds of digital and analogical sensors to monitor water, and the communication of data with regularity through any of the most common M2M wireless protocols: 3G, WiFi, LoRa®, etc.
All the sensors installed in the Nanoenvi Water equipment are carefully verified by our technicians and individually calibrated at our laboratory, thus ensuring maximum precision, stability, safety and reliability in the measurements.
IoT
The Nanoenvi WATER devices have been designed to operate in IoT networks. For this reason, all the devices are delivered integrated with the IoT platform chosen by the client (through protocols such as CoAP, REST, MQTT, etc.), or with the cloud platform developed by ENVIRA specifically to monitor water.
Microcontroller
ATMEL SAM4
Frequency
120 MHz
SRAM
160 KB
EEPROM
4 KB
FLASH
4GB
External storage
up to 4GB on card SD
Clock
RTC (32 KHz)
Consumption
200uA/Mhz
Casing material
ASA LURAN
Sealing
Elastosil® silicone rubber
Cover screws
Stainless steel
Type of protection
IP66 EN 60529
Resistance to impact
According to ISO 2039-1
Ambient temperature (min.)
5 ° C
Ambient temperature (max.)
40 ° C
Approximate weight
550 g
Dimensions
240x160x90
Maximum number of sensors
6
Physical sensors (pH, conductivity, turbidity, dissolved oxygen and temperature)
Chemical sensors (calcium, fluoride, fluoroborate and nitrate)
3G communications module
Lora® communications module
Xbee® communications module
Meteorological sensors (wind speed, and direction, temperature, relative humidity, solar radiation, rain).
Nanoenvi WATER
Sensors of pH, conductivity, turbidity, dissolved oxygen and temperature
3g communications for server in the cloud
Nanoenvi WATER
Monitoring of fertirrigation facilities
Monitoring of fertirrigation facilities
Sensors of pH, conductivity and nitrates
Do you want to become a distributor?